Fuel Stick Guide – Piper PA28


Product Features:

  • 3D printed in Red PETG
  • References the top of the filler opening to hold stick perpendicular and centered in the opening while taking a fuel reading.  This will give you a more repeatable reading and very good to use when setting the K factor value if you have an engine monitor with fuel flow calibration.
  • Has flat sides so it will not roll off the wing when set down and also has clearance for fuel cap chains.
  • Impossible to drop the stick in the tank when the guide is attached.
  • Designed to be used with your existing Fuel Hawk Fuel stick for your airplanes tank configuration.
  • The Piper PA28 version is designed to negate the 7 degree dihedral and hold the stick vertical while dipping the tanks.
  • This is designed for a fuel filler opening that is 2.25″ in Diameter.
  • Currently tested on a Piper Archer, Warrior and Cherokee.
  • For other Versions of the PA-28 make sure to verify the fuel filler opening is 2.25″ in Diameter and the wing has 7 degrees of dihedral per side.  If a special version is required for the Arrow, Dakota or Cadet feel free to contact me.

Included with Purchase:

  • Fuel Guide 3D printed in Red PETG.
  • 2ea O-Rings used to keep Fuel Guide attached to the Fuel Hawk Fuel Stick.  Only one is needed and includes a spare.
  • 1ea Use and setup instructions

Shipping Fee: Flat rate same price for 1ea or multiples.

  • USA including Hawaii & Alaska: $5.00
  • Mexico & Canada: $25
  • Europe: $30
  • South America: $35
  • Africa and Asia: Contact me prior to order for quote

Content missing